We Deliver Worldwide!
877.598.3289
info@polarsteelbuildings.com

Framing Systems

HomeBuilding SystemsFraming Systems
Framing Systems

Beam and Column

The Polar Steel Beam and Column system shall normally be manufactured of solid web members having tapered or uniform depth rafters, rigidly connected to tapered or uniform depth exterior columns and uniform depth or round section interior columns.  This system provides a single gable, rigid frame having interior columns designed to support the specified loads.
Framing Systems

Rigid Frame

The Polar Steel Rigid Frame system shall normally be manufactured of solid web members having tapered or uniform depth rafters, rigidly connected to tapered or uniform depth columns.  This system provides a clear span, single gable, rigid frame designed to support the specified loads.
Framing Systems

Single Slope

The Polar Steel Single Slope system shall normally be manufactured of solid web members having tapered or uniform depth rafters, rigidly connected to tapered or uniform depth columns.  This system has no gable, can be clear span or have interior columns designed to support the specified loads.
Framing Systems

Lean To

The Polar Steel Lean To system shall normally be manufactured of solid web members having tapered or uniform depth rafters with pinned connections to uniform depth columns.  This system provides a clear span, single sloped frame, straight column, designed to support the specified loads.

Components

Framing Systems

Cee

Cees are vertical members that are used as columns and jambs. This member provides support for the ends of the wall girts.

  • Depths: 8″, 10″ and 12″
  • Gauges: 16, 15, 14, 13 and 12
  • Finish: Grey, Red Oxide and Pre-galvanized

 

Framing Systems

Eave

Eave struts are located at the eave of the building. The roof and wall panels attach and are supported by this member.

  • Depths: 8″, 10″ and 12″
  • Gauges: 16, 14 and 12
  • Finish: Grey, Red Oxide and Pre-galvanized

 

Framing Systems

Zee

Zees are horizontal members that are used as roof purlins and wall girts.  This member provides support for the roof and wall panels.

  • Depths: 8″, 10″ and 12″
  • Gauges: 16, 15, 14, 13 and 12
  • Finish: Grey, Red Oxide and Pre-galvanized